The Porsche Newsroom is a service provided by the Porsche Communication for journalists, bloggers and the online community.
© 2024 Dr. Ing. h.c. F. Porsche AG
The published consumption (l/100km and Wh/km), emissions (g/km) and kilometre (km) range figures are determined by Porsche AG testing in accordance with The Economic Commission for Europe standard (ECE) on test vehicles in compliance with ADR 81/02. Actual figures will vary as they are dependent on many factors, including without limitation: individual driving style, road and traffic conditions, environmental conditions, fuel quality, a vehicle’s or battery’s condition, load and use. Extra features and accessories (eg: equipment, wheels or tyres used etc.) can change relevant vehicle parameters such as weight, rolling resistance and aerodynamics and can also affect the consumption, emission, range and performance values of a vehicle. CO₂ emissions can also be generated at the power source when vehicles are being recharged, unless 100% renewable energy is used. Generally, consumption, emissions, kilometre range and charging times will vary from the published figures in real world Australian driving and charging conditions.
The specified charging outputs and times (hour/minutes) are dependent on various factors: in general, the charging output and time can vary due to physical and chemical limits, depending on factors such as the available output of the country-specific energy infrastructure, the customer's own domestic installation, the temperature, interior pre-conditioning and charging status, as well as the age of the battery. Charging times may therefore be significantly higher than those specified. To achieve the optimum value of the specified DC charging time (DC = direct current) for a charge status increase from 10 to 80%, a CCS (combined charging system) fast-charging pedestal with the maximum DC charging power of the vehicle and greater than 850V is required, as well as a battery temperature of 30°–35°C. The charging status when commencing charging must not exceed 10%. For physical and chemical reasons, the charging speed decreases as the battery approaches its full capacity. Therefore, it usually makes sense to use fast DC charging to charge the battery up to 80% or up to the required range. The predominant use of CCS fast charging pedestals leads to a long-term increase in charging times. For regular fast DC charging, we recommend a maximum charging output of 50kW. When charging in a domestic environment, AC charging (AC = alternating current) is recommended. Using an (AC) industrial electrical outlet will result in improved efficiency and a much shorter charging time compared to using a household socket.
A lithium-ion battery is subject to physical and chemical ageing, as well as wear and tear. This reduces the battery capacity, depending on the usage pattern and environmental conditions, resulting in a reduction in range and an increase in charging times as the battery ages. Due to the effect of temperature on battery and charging performance, as well as battery life, please consider the following when parking, driving and charging your car:
- If possible, avoid permanent ambient temperatures of over 30°C, such as prolonged parking in direct sunlight. If you cannot avoid ambient temperatures of over 30°C when stationary, connect the vehicle to the mains supply after use and charge the high-voltage battery with AC (alternating current) to a maximum charge status of 85%.
- If the car is left stationary for more than two weeks, the ambient temperature should, if possible, be between 0°C and 20°C and the battery charge status maintained between 20% and 50% during this time.
- For the shortest possible charging time, a battery temperature of approx. 30°C to 35°C is ideal. If charging the car on a daily basis, the maximum charge status of the high-voltage battery should be set to approx. 80%.
PS (PferdeStärke, German for horsepower) is the standard unit used in the European Union to measure the power output of a motor in ‘metric horsepower’. Published figures should only be used for the purpose of comparison between vehicles. Information provided and images displayed on this website or links from our website may relate to models, performance characteristics, optional extras and features only available in overseas models of the vehicle and must not be relied upon as they may be unavailable in Australia. Please note, product changes may have been made since the production of any content. Please contact an Official Porsche Centre for specific information on current data, vehicles, performance characteristics, optional extras and features available in Australian delivered vehicles.
Price is the recommended retail price before statutory on-road and dealer delivery charges, which vary from State to State and between dealers. Driveaway pricing available via the Porsche Car Configurator at Porsche.com.au. All prices shown are based on a standard specification vehicle with no optional equipment (unless otherwise selected). Final prices may vary from dealer to dealer and according to individual circumstances. Prices are subject to change without notice.
Press releases may contain forward-looking statements and information on the currently expected business development of Porsche AG. These statements are subject to risks and uncertainties. They are based on assumptions about the development of economic, political and legal conditions in individual countries, economic regions and markets, in particular for the automotive industry, which we have made based on the information available to us and which we consider to be realistic at the time of publication. If any of these or other risks materialise, or if the assumptions underlying these statements prove incorrect, the actual results could be significantly different from those expressed or implied by such statements. Forward-looking statements in this presentation are based solely on the information pertaining on the day of publication. These forward-looking statements will not be updated later. Such statements are valid on the day of publication and may be overtaken by later events. This information does not constitute an offer to exchange or sell or offer to exchange or purchase securities.
_3rd-f.l.-Chin-Beckmann-(CEO).jpeg/jcr:content/DSP%20Concepts%20team_2nd%20f.l.%20Paul%20Beckmann%20(CTO)_3rd%20f.l.%20Chin%20Beckmann%20(CEO).jpeg)
.jpg/jcr:content/PCA_MAW_1510_001_Low%20Res%20(1).jpg)
